
CNFSimulator.A320 TCAS Product Specification (PDF)
Product Overview
The CnTech A320 First Officer Lighting and TCAS Panel (TCAS) is modelled 1:1 on the real panel in appearance, dimensions and operating logic, and is installed on the first officer side of the cockpit centre pedestal. The upper half manages cabin flood and integrated lighting, while the lower half is the air traffic control transponder and TCAS control area. A two-layer construction is used: the upper layer carries the professional light-guide panel and markings, the lower layer provides structural fixing and circuit-board mounting, and every knob is scanned and reproduced from the real aircraft geometry.
- Modelled from 3D scans of the real panel; plate profile, markings and mounting holes are faithfully reproduced
- Screw specifications, surface colours and knob shapes replicated detail by detail — the markings are backlit as well
- Upper layer: aviation-grade light-guide panel; lower layer: structural fixing and circuit-board mounting
- A single network cable carries both communication and power
Key Features
- 1:1 Authentic Reproduction
Modelled from 3D scans of the real panel: plate profile, markings and mounting holes are replicated exactly, and screw specifications, surface colours and knob shapes are reproduced detail by detail — the markings are backlit too. - Professional Light-Guide Panel
The upper layer uses an aviation-grade light-guide plate with a high-grade baked finish. Warm-white backlight spreads evenly through the guide layer, giving uniform brightness with no hot spots or light leakage and crisp marking edges. - Robust Two-Layer Structure
The panel is built in two layers: the lower layer handles structural fixing and circuit-board mounting, giving the assembly high rigidity and excellent resistance to deformation. - High Compatibility
One network cable handles both communication and power. Together with the iFSim.Ready software it supports MSFS, Prepar3D, X-Plane and other mainstream platforms.
Functional Description
The panel takes rotary switches, keypad keys and push-buttons as inputs, and displays the transponder code and failure status as outputs. The lighting zone and the TCAS zone are laid out exactly as on the real aircraft.
Input Signals
| Device | Specification |
|---|---|
| FLOOD LT / PED | Two knobs with on/off switch, continuous adjustment; 300° travel — OFF at full counter-clockwise, rising to BRT clockwise |
| TCAS | Three-position rotary switch, 45° per position; STBY / AUTO / ON |
| TCAS 1 / 2 | Two-position rotary switch, 45° per position; 1 / 2 |
| RPTG | Two-position rotary switch, 45° per position; OFF / ON |
| MODE | Four-position rotary switch, 45° per position; THRT / ALL / ABV / BLW |
| TCAS Mode | Three-position rotary switch, 45° per position; STBY / TA / TA-RA |
| Code Keypad | 11 self-resetting keys with black key caps; digits 0–9 and CLR |
| IDENT | Self-resetting key, black key cap, warm-white backlighting; 2 N actuation force |
| AIDS PRINT / DFDR EVENT | Two self-resetting keys with black key caps |
Output Signals
- A four-digit seven-segment display shows the TCAS code in amber.
- TCAS FAIL is an amber annunciator lamp; when extinguished it appears black.
Compatibility
Technical Specifications
The table below summarises the principal mechanical, electrical and compatibility parameters of the A320 First Officer Lighting and TCAS Panel.
| Item | Specification |
|---|---|
| Dimensions | 148 × 125.6 × 68.4 mm (W × H × D) |
| Package Dimensions | 200 × 170 × 120 mm (L × W × H) |
| Weight | 0.5 kg |
| Panel Structure | Professional light-guide panel; colours and markings matched to the real aircraft |
| Interface | Single RJ45 (signal and power combined) |
| Network Cable | Shielded RJ45 network cable, ≤ 26 AWG (smaller number = thicker) |
| Communication | CAN bus — stable and interference-resistant |
| Installation | As on the real aircraft; horizontal hole spacing 137 mm |
| Compatible Aircraft Models | iFSim A320, ProSim A320, ToLiss A320, Fenix A320, Jeehell A320, etc. |
Logistics Information
Will be shipped within 7 days after placing the order.
Customer Support
For any inquiries, please contact us at info@en.cntech.com.Inquiries will be addressed within 2 business days.
Warranty
Includes a 1-year limited warranty.