CNFSimulator.C172(Cessna C172)

Flight Deck

CNFSimulator.C172 Complete Glass Display Screen

*1 MFD Display Unit with 800×600 screen.

*1 PDF Display Unit with 800×600 screen.

*1 Audio Panel.

*all buttons for a.o. the Autopilot in position.

*VNV Key is available.

Airspeed Indicator

*indicate the Airspeed of an Airplane. Attitude Indicator

*simulated cockpits for General Aviation.

Altimeter

*double pressure scale for inches and millibar.

Visual system and Beamers

Recommended: 180 degree POV

Our multichannel Flight simulator panoramic view configuration are design to be controlled with 3 High Definition short throw beamers from the main Flight simulator computer. It is one large stretched forward view. The final projected image will result in a panoramic 180 degree view without a real right and real Left flight simulator views.

3 x Recommended Beamers

*720 definition resolution.

*3000 ANSI lumen

Merge Software (dongle included)

3 x Projector hang stick

2 x Inside Screen (17.3 inches)

Inside Screen (21.5 inches)

CNFSimulator.C172 Shell

*full size fuselage.

*available on moving platform.

*made of fire-retardant, high quality ABS.

CNFSimulator.C172 Panel Glass Cockpit

*made of 2 mm aluminum

*powder coated for extreme resistance against damages

2 x Rudder Pedals

*proportional toe-brake system

*Stainless steel rudder system

*Die-cast aluminum

*3 mm powder coated.

*thick stainless steel case.

2 x Yoke System

*able to turn left and right 90 degrees for a total of 180 degrees.

*170 mm maximum movement in- and out.

Flaps Switch and Position Indicator

*replica of the original Cessna 172 Flaps Switch and Indicator.

*4 positions of Flaps Up, Flaps 10 degrees, Flaps 20 degrees and Flaps 30 degrees.

Mixture

*Quality finished aluminum casing.

*Stainless steel end fittings, swivel, and end rod.

*Teflon inner liner for low friction.

* FAA-style Red knob and leaning possibility (fine tuning). Travel: 3-3/8″.

Throttle

* quality finished aluminum casing.

*stainless steel end fittings, swivel, and end rod.

*Teflon inner liner for low friction.

* FAA-style Black knob. Travel: 3-3/8″.

Instructor station desk

*Two monitors

*Control the simulation’s environment

*Change weather

*Reposition aircraft

*Trigger malfunctions in real time as the simulation is running.

Prop

*Quality finished aluminum casing

*Stainless steel end fittings, swivel, and end rod.

*Teflon inner liner for low friction.

* FAA-style Blue knob and fine tuning possibility. Travel: 3-3/8″.

Key Lock Starter Switch

5 positions: – OFF – RIGHT MAGNETO – LEFT MAGNETO – BOTH MAGNETO’s – START

Circuit Breakers Set

*2 x 16 real Aircraft Circuit   Breakers

*One USB controller 

19″ rack computer system

*highest specs of the moment.

Wet Compass

* Precise replica USB Wet Compass

Switches Board

*All switches and the connection for the Tank Switch, Fuel Switch-OFF and Handbrake.

*Light regulation for the panel instruments.

Tank Switch and Fuel Switch

*3 positions, 90 degrees: Left, Both and Right

* Fuel Switch Off switch included

Minimum recommended Space incl. visuals: 6m*4.8m*3m

Pin It on Pinterest

Shares
Share This